The Solo tank monitor attaches its sensor to the outside of your plastic or composite holding tank. It's a foil tape that connects to the neat looking 2"x 3.5" Solo display panel. Locate this nice looking little display panel anywhere. (Over the toilet in the head is our suggestion) You will now know at a glance your holding tank's level of fill.
Since our tank sensor tapes to the outside of your plastic holding tank it can't be fouled and is really easy to install. Just cut it to the vertical length of your tank and set the empty and full calibration points on the Solo's panel memory. You set it once and it's locked in to its memory.
Now that you're installed, this unit automatically checks the tank level every couple of hours and alerts you whit it's red "Full" Led or just press the "Read" button to see the level of fill. Uses .001 Amps when your batteries are switched on and 0.00 Amps when your batteries are off. We also have a sensor that fits inside a metal tank. This is a clog-proof floatless sensor that is simply cut to length to adapt to various size tanks.
Our tank monitor is also compatible with nearly all sensor types available on the market today making it easy to retrofit into an existing tank system or to install new.
The Profile 1-8 tank monitor is the big sister to the Solo single tank monitor. It uses the same sensors as the Solo and allows you to install sensors on all of your onboard tanks. Start off with just the panel and your holding tank then add your water tanks once you see how easy it is to do.
The Profile 1-8 also has an additional input for an LPG sensor. Some newer LPG tanks used in the RV industry and soon to come in the marine industry have built in sensors. The Profile panel is ready to hook up to these with a single input wire when you're ready to upgrade your LPG tank.
The Profile Legacy corrects for odd-shaped tanks and sensor types. This panel is also compatible with nearly all sensor types available on the market today making them easy to both retrofit into an existing system or to install new. The Profile Legacy does not come with sensors. Order sensors separately.
|Manual and Installation Instructions for SOLO Monitor||44.49 KB|
|Manual and Installation Instructions for PROFILE 8-Sensor Monitor||144.77 KB|
|Installation Instructions for External Level Sensor for Aqueous Liquid Tanks||23.6 KB|
|Installation Instructions for Internal Level Sensor for Aqueous Liquid Tanks||140.74 KB|
|Float Gauge Hookup Instructions for Fuel Tanks||16.37 KB|
|Drawing for Internal Level Sensor Adaptor Plate||23.79 KB|